EMC, RF, high frequency test equipment supplier dedicated to measurement

Hilo test




Découvrez plus de détails sur chaque produit en survolant l’image correspondante.

AC DC Test equipment

AC DC Test equipment

Hilo test is a German manufacturer 

Gamme AC tester

Gamme HTS

Gamme HVTS

CDN2012- COUPLING CLAMP

CDN2012- COUPLING CLAMP

The coupling clamp CDN 2012 conforms exactly to the requirements of ISO 7637-3 and other standards, guaranteeing that tests are carried out in strict compliance with the standard.
The CDN allows the fast nanosecond pulse bursts ( ISO 3a and 3b) to be injected in cable runs. Very high impedance signal lines are also to be found in vehicles on which the disruptive effects of ISO pulses 1 and 2 can also show up through capacitive coupling

According to standard

  • ISO:ISO 7637-3

conducted immunity test generator

conducted immunity test generator

Hilo test is a German manufacturer for Conducted immunity test generators. The generator allows surge testing of components and devices, galvanic coupling of surges

to cable shields, shielded enclosures and cabinets as well as testing electromagnetic

compatibility, EMC, of electronic devices and systems against pulsed and conducted

interference.

by example:

The Combination Wave Generator PG 10-504  from Hilo Test is a combined impulse-current-/impulse voltage

generator which, for high-impedance loads, RL > 100Ω, delivers a standard impulse

voltage with waveform 1.2/50μs and, for short-circuited output, a standard impulse current

with waveform 8/20μs.


Conducted immunity test generators dedicated to:

-Electrostatic discharge immunity  test : EN / IEC 61000-4-2 and ISO TR 10605
- Fast burst transcient test : EN/ IEC 610004-4
- Surge immunity test : EN/ IEC 610004-5
- Voltage dips and variations test : EN/ IEC 610004-11
- Magnetic field immunity test at 50/60 Hz: EN/ IEC 610004-8
- Pulse magnetic filed immunity test: EN/ IEC 610004-9
- Damped oscillatory magnetic field immunity test: EN/ IEC 610004-10
- Ring wave immunity test:  EN/ IEC 610004-12
- Damped oscillatory wave immunity Test : EN/ IEC 610004-18
- Telecom surge immunity test : FCC part 68, IEC 60060, CCITT

 

EFTC2012 - PINCE CAPACITIVE DE COUPLAGE

EFTC2012 - PINCE CAPACITIVE DE COUPLAGE

The Capacitive Coupling Clamp, EFTC 2012, provides the ability to couple Burst / EFT pulses to data lines. It can also be used for coupling to main lines where no CDN is available, for example high current lines >200 A.

According to standard

  • IEC: IEC 61000-4-04

EFTG simulators

EFTG simulators

Hilo test is a German manufacturer for Conducted immunity test generators.


Conducted immunity test generators dedicated to : Fast burst transcient test : EN/ IEC 610004-4
        

 

ESD Gun/ESD simulator

ESD Gun/ESD simulator

ESD Gun compliant to (IEC, ANSI, SAE, ISO) and automotive ISO 10605

or ESD simulator generator : simulates disturbances caused by electrostatic discharge
contact discharge up to 9 kV, air discharge up to 16.5 kV
or modele up to 30 kV: contact and air

High voltage divider

High voltage divider

impulse current generator

impulse current generator

Hilo Test manufactures power generator for surge current material and safety tests, in particular for the examination of diverting elements such as gas discharge tubes, varistors, SPDs, and components in which such protective elements are installed, according to the IEC/EN 61643-11.