EMC, RF, high frequency test equipment supplier dedicated to measurement

York EMC




Découvrez plus de détails sur chaque produit en survolant l’image correspondante.

Active reception antenna

Active reception antenna

The Active Receive Antenna (ARA 01) is a compact emissions antenna with performance comparable to a conventional wideband passive antenna such as the Bilog™.

The small size makes the ARA 01 particularly suitable for use in anechoic chambers; however it can also be used on an Open Area Test Site (OATS) or at on-site locations.

The ARA 01 features two sets of interchangeable Dipole Antenna Elements (DAE). The standard set (DAE01) is optimized for 200MHz-1GHz, with usable sensitivity down to 30MHz. For improved sensitivity between 30-300MHz, the optional DAE02 set is available.
 

cable coupling clamp CCC01

cable coupling clamp CCC01

for the purpose of measuring the EMC properties of cables: shielding and coupling.

Frequency Range : 10 kHz to 1 GHz typical (usable to higher frequencies, depending on application)
Output connector : 50 Ω N-type socket
Dimensions :
220mm × 880mm (0.5m test setting)
220mm × 740mm (0.3m test setting)
Weight : 3 kg (typical excluding cable-under-test and any associated ferrites)

Comb generator emitter

Comb generator emitter

Comb Generator Emitter

CGE 01
: 50 MHz to 18 GHz
CGE 02 : 250 MHz to 26 GHz
CGE 03 : 900 MHz to 40 GHz

Manufacturer: YORK EMC

Harmonic & flicker test generator

Harmonic & flicker test generator

Harmonic & flicker generator : HFG 01


Frequency range: 50Hzto 2kHz (40thharmonic) direct connection

  • Stable load simulation
  • Injects harmonics to EN61000-3-2and Flicker to EN61000-3-3
  • Compact and portable

Noise Emitter

Noise Emitter

Noise Emitter

 

CNE V : 9 kHz to 1 GHz
CNE V+ : 9 kHz to 3.5 GHz

CNEVI : 30 Hz - 30 MHz and with option 2 up to 6 GHz 



Manufacturer : YORK EMC