EMC, RF, high frequency test equipment supplier dedicated to measurement

Immunity test equipment




Découvrez plus de détails sur chaque produit en survolant l’image correspondante.

conducted immunity test generator

conducted immunity test generator

Hilo test is a German manufacturer for Conducted immunity test generators. The generator allows surge testing of components and devices, galvanic coupling of surges

to cable shields, shielded enclosures and cabinets as well as testing electromagnetic

compatibility, EMC, of electronic devices and systems against pulsed and conducted

interference.

by example:

The Combination Wave Generator PG 10-504  from Hilo Test is a combined impulse-current-/impulse voltage

generator which, for high-impedance loads, RL > 100Ω, delivers a standard impulse

voltage with waveform 1.2/50μs and, for short-circuited output, a standard impulse current

with waveform 8/20μs.


Conducted immunity test generators dedicated to:

-Electrostatic discharge immunity  test : EN / IEC 61000-4-2 and ISO TR 10605
- Fast burst transcient test : EN/ IEC 610004-4
- Surge immunity test : EN/ IEC 610004-5
- Voltage dips and variations test : EN/ IEC 610004-11
- Magnetic field immunity test at 50/60 Hz: EN/ IEC 610004-8
- Pulse magnetic filed immunity test: EN/ IEC 610004-9
- Damped oscillatory magnetic field immunity test: EN/ IEC 610004-10
- Ring wave immunity test:  EN/ IEC 610004-12
- Damped oscillatory wave immunity Test : EN/ IEC 610004-18
- Telecom surge immunity test : FCC part 68, IEC 60060, CCITT

 

CDN2012- COUPLING CLAMP

CDN2012- COUPLING CLAMP

The coupling clamp CDN 2012 conforms exactly to the requirements of ISO 7637-3 and other standards, guaranteeing that tests are carried out in strict compliance with the standard.
The CDN allows the fast nanosecond pulse bursts ( ISO 3a and 3b) to be injected in cable runs. Very high impedance signal lines are also to be found in vehicles on which the disruptive effects of ISO pulses 1 and 2 can also show up through capacitive coupling

According to standard

  • ISO:ISO 7637-3

EFTG simulators

EFTG simulators

Hilo test is a German manufacturer for Conducted immunity test generators.


Conducted immunity test generators dedicated to : Fast burst transcient test : EN/ IEC 610004-4
        

 

Surge generators

Surge generators

Hilo test is a German manufacturer for Conducted immunity test generators. The generator allows surge testing of components and devices, galvanic coupling of surges

to cable shields, shielded enclosures and cabinets as well as testing electromagnetic

compatibility, EMC, of electronic devices and systems against pulsed and conducted

interference.


Conducted immunity test generators dedicated to:

 - Surge immunity test : EN/ IEC 610004-5
 
- Telecom surge immunity test :  IEC 60060
    

 

power fail generator

power fail generator

Hilo test is a German manufacturer for Conducted immunity test generators.


- Voltage dips and variations test : EN/ IEC 610004-11 and 610004-29
     

 

multifonctional generator

multifonctional generator

The multifunctional test simulators from Hilo- Test are perfect basic equipment for each EMC test laboratory. These combination devices offer the most versatile and at the same time economical solution for full-compliant immunity tests. Below you will find all the "All-In-One" - test generators for various purposes with a wide range of accessories

ringwave generator

ringwave generator

Hilo test is a German manufacturer for Conducted immunity test generators. The generator allows surge testing of components and devices, galvanic coupling of surges

to cable shields, shielded enclosures and cabinets as well as testing electromagnetic

compatibility, EMC, of electronic devices and systems against pulsed and conducted

interference.

by example:

The Combination Wave Generator PG 10-504  from Hilo Test is a combined impulse-current-/impulse voltage

generator which, for high-impedance loads, RL > 100Ω, delivers a standard impulse

voltage with waveform 1.2/50μs and, for short-circuited output, a standard impulse current

with waveform 8/20μs.


Conducted immunity test generators dedicated to:

-Electrostatic discharge immunity  test : EN / IEC 61000-4-2 and ISO TR 10605
- Fast burst transcient test : EN/ IEC 610004-4
- Surge immunity test : EN/ IEC 610004-5
- Voltage dips and variations test : EN/ IEC 610004-11
- Magnetic field immunity test at 50/60 Hz: EN/ IEC 610004-8
- Pulse magnetic filed immunity test: EN/ IEC 610004-9
- Damped oscillatory magnetic field immunity test: EN/ IEC 610004-10
- Ring wave immunity test:  EN/ IEC 610004-12
- Damped oscillatory wave immunity Test : EN/ IEC 610004-18
- Telecom surge immunity test : FCC part 68, IEC 60060, CCITT

 

Telecom generator

Telecom generator

Hilo test is a German manufacturer for Conducted immunity test generators. The generator allows surge testing of components and devices, galvanic coupling of surges

to cable shields, shielded enclosures and cabinets as well as testing electromagnetic

compatibility, EMC, of electronic devices and systems against pulsed and conducted

interference.

by example:

The Combination Wave Generator PG 10-504  from Hilo Test is a combined impulse-current-/impulse voltage

generator which, for high-impedance loads, RL > 100Ω, delivers a standard impulse

voltage with waveform 1.2/50μs and, for short-circuited output, a standard impulse current

with waveform 8/20μs.


Conducted immunity test generators dedicated to:

-Electrostatic discharge immunity  test : EN / IEC 61000-4-2 and ISO TR 10605
- Fast burst transcient test : EN/ IEC 610004-4
- Surge immunity test : EN/ IEC 610004-5
- Voltage dips and variations test : EN/ IEC 610004-11
- Magnetic field immunity test at 50/60 Hz: EN/ IEC 610004-8
- Pulse magnetic filed immunity test: EN/ IEC 610004-9
- Damped oscillatory magnetic field immunity test: EN/ IEC 610004-10
- Ring wave immunity test:  EN/ IEC 610004-12
- Damped oscillatory wave immunity Test : EN/ IEC 610004-18
- Telecom surge immunity test : FCC part 68, IEC 60060, CCITT